Assembly instructions
Tyre rack for C1000 V2 and C2000 box trailers
Dimensioned drawings, parts list and illustrated steps to bolt the tyre rack inside a C1000 V2 or C2000 box trailer, and how to load and strap the wheels.
C1000 · C2000
Safety first
- Two people are needed for the installation.
- Load the wheels tightly side by side between the two transport straps and tension the straps: no gaps and no tilted wheels.
Before you start
- C1000 V2
- Rear beam 2,000 mm, front beam and block pipe 1,200 mm, overall width 1,216 mm.
- C2000
- Rear beam 2,200 mm, front beam and block pipe 1,400 mm, overall width 1,416 mm.
At a glance
- People needed
- 2
- Rack height
- Adjustable from 900 to 1,250 mm
- Rack depth
- 665 mm
- Feet position
- On the junction of the floor panels, 55 mm from the side wall
- Drill bit
- 8 mm, for steel
- Transport straps
- 2 x 25 mm x 2,000 mm, LC 400 daN
Tools you need
- Tape measure
- Pencil
- Drill
- 8 mm drill bit for steel
- 13 mm spanner
- 5 mm Allen key