Assembly instructions

External spare wheel holder for horse trailers

Illustrated guide to fitting the external spare wheel holder on Gold and Touring horse trailers, on aluminium or plywood walls.

Cheval LibertéGold 2 · Gold 3 · Gold Aluline · Gold One · Gold S · Touring 2D · Touring Country · Touring Jumping · Touring One

Before you start

Gold S and Gold Aluline
The holder can go on the right, left or front wall.
Gold One, Gold 2, Gold 3, Touring One, Touring Jumping, Touring Country, Touring 2D
The holder can go on the right or left wall only, not the front wall.
Gold 3 Composite
No mounting position is allowed for this holder.
Aluminium walls
Drill 5 mm holes and fix the holder with 6 rivets using a riveting tool.
Plywood walls
Drill 8 mm holes, protect them with acrylic paint, then fix the holder with bolts and self-locking nuts (13 mm wrench).

At a glance

Side wall position
Between the wheels, 250 to 300 mm above the mudguard
Front wall position
650 to 700 mm high
Drill bit, aluminium walls
5 mm
Drill bit, plywood walls
8 mm

Tools you need

  • Tape measure
  • Pencil
  • Drill
  • 5 mm drill bit (aluminium walls)
  • 8 mm drill bit (plywood walls)
  • Riveting tool (aluminium walls)
  • Acrylic paint (plywood walls)
  • 13 mm wrench

Drawings