Assembly instructions

Back flap installation – Optimax, Minimax and Touring

How to fit or replace the rear back flap on Optimax, Minimax and Touring trailers, shown step by step in pictures.

Cheval LibertéMinimax · Optimax · Touring

Safety first
  • Install the flap in the centre.

Before you start

Retrofitting the back flap yourself (trailer not prepared)
You also need a drill with 6 mm and 11 mm bits and a rivet nut tool.
Replacing an existing back flap (Optimax / Minimax)
You only need a 4 mm Allen key and 10 mm and 13 mm wrenches.
Replacing an existing back flap (Touring)
You only need 4 mm and 6 mm Allen keys and 10 mm and 13 mm wrenches.
Touring
Steps 2 to 4 cover the assembly of the back flap closer.
Optimax / Minimax
The back flap kit CZ000518 is for V2 versions only.
Touring
The back flap kit CZ000753 is for the Touring V2 only.

At a glance

Optimax / Minimax, step 7
Drill 11 mm in the centre of the closing hole
Touring fixing bolts (parts 5 and 8)
8 x 30 mm

Tools you need

  • Drill
  • 6 mm and 11 mm drill bits
  • Rivet nut tool
  • 4 mm Allen key
  • 6 mm Allen key (Touring)
  • 10 mm and 13 mm wrenches

Drawings