Assembly instructions
Front ramp assembly
How to assemble the front ramp (riveting and gluing its elements) and fit it. The video shows the installation; the PDF covers Optimax and Minimax.
Maxi 2 · Maxi 3 · Maxi 4 · Minimax · Optimax · Touring · Touring XL
The video loads from YouTube when you press play.
At a glance
- Ramp rivets (parts 1 and 4)
- Ø4.8 x 16 mm (19 + 10 pcs)
- Fixing bolts
- M8 x 20 mm (1), M6 x 20 mm (2), Ø6 x 20 mm (6)
Tools you need
- 10 mm and 13 mm wrenches
- 5 mm Allen key
- Riveter
- Drill
- 5 mm and 6 mm drill bits
Drawings
Steps
0 / 6 done
Glue the elements
Use the glue supplied with the kit between elements 3 and 9.
Parts: 3, 9, glue
Rivet element 1
Rivet element 1 with 7 rivets.
Parts: 1
Rivet elements 6 and 7
Rivet elements 6 and 7 with 6 rivets.
Parts: 6, 7
Glue the inner edges
Once all elements are in place, apply glue to the inner edges of elements 6 and 7.
Parts: 6, 7, glue
Fit the ramp in the trailer
Install the ramp in the trailer with parts 10 to 18 as shown in the drawings. The drawing shows the correct closed position.
Parts: 10-18
Final fixing
Complete the fixing with parts 18 and 19 as shown in the last drawing.
Parts: 18, 19