Assembly instructions
Corner partition installation – Maxi 2, 3 and 4
How to fit the hinged CORNER partition and its handles in Maxi 2, Maxi 3 and Maxi 4 trailers.
Maxi 2 · Maxi 3 · Maxi 4
Before you start
- Maxi 2 bought before November 2023
- Cut the aluminium panel to 1,570 mm.
- Maxi 3 or Maxi 4 bought before November 2023
- Cut the aluminium panel to 1,720 mm.
- Maxi 2
- Use the ZS 8 handle.
- Maxi 3 / Maxi 4
- Use the ZS 6 handle; drill 4 holes and fit rivet nuts first.
At a glance
- Pad size
- 12 x 35 x 195 mm
- Rivet nut holes (Maxi 3 / Maxi 4)
- 4 holes, 11 mm
Tools you need
- Drill with 11 mm bit (Maxi 3 / Maxi 4)
- Rivet nut tool (Maxi 3 / Maxi 4)
Drawings
Steps
0 / 6 done
Drill the holes (Maxi 3 / Maxi 4)
Drill 4 holes of 11 mm for the rivet nuts at the positions shown on the drawing.
Fit the rivet nuts (Maxi 3 / Maxi 4)
Rivet the rivet nuts into the 4 holes.
Parts: Rivet nuts (4)
Slide the pads onto the guide
Slide the pads onto the guide.
Parts: Pads
Fit the main handle
Fit the ZS 8 handle (Maxi 2) or ZS 6 handle (Maxi 3 / Maxi 4) and tighten the screws.
Parts: ZS 8 / ZS 6 handle
Fit the ZS 5 handle
Fit the ZS 5 handle and tighten the eye bolt screw.
Parts: ZS 5 handle, eye bolt screw
Check the installation
Compare with the "correct installation" pictures.