Assembly instructions
Installing the reversing camera interference filter
How to wire the 12 V anti-interference filter between the trailer wiring and the reversing camera, inside the interior lamp.
Box trailers (Cargo)
Safety first
- Use only a hand screwdriver to refit the lamp, so as not to damage the mounting holes.
At a glance
- Filter voltage
- 12 V
Tools you need
- Hand screwdriver
Drawings
Steps
0 / 6 done
Remove the lamp
Remove the 2 screws and take the interior lamp off the wall.
Disconnect the camera
Disconnect the black camera wire and then the red camera wire from the trailer wiring.
Connect the filter to the trailer wiring
Connect the black filter wire to the white trailer wire. Connect the red filter wire to the black trailer wire.
Parts: CZ001548
Connect the filter to the camera
Connect the black filter wire to the black camera wire and the red filter wire to the red camera wire. Slide insulating sleeves over the wire joints.
Parts: CZ001548
Tuck the filter away
Place the filter and the cables inside the lamp.
Refit the lamp
Screw the lamp, with the filter inside, back in its original place. Use only a hand screwdriver.