Assembly instructions
Back flap installation – Optimax, Minimax and Touring
How to fit or replace the rear back flap on Optimax, Minimax and Touring trailers, shown step by step in pictures.
Minimax · Optimax · Touring
Safety first
- Install the flap in the centre.
Before you start
- Retrofitting the back flap yourself (trailer not prepared)
- You also need a drill with 6 mm and 11 mm bits and a rivet nut tool.
- Replacing an existing back flap (Optimax / Minimax)
- You only need a 4 mm Allen key and 10 mm and 13 mm wrenches.
- Replacing an existing back flap (Touring)
- You only need 4 mm and 6 mm Allen keys and 10 mm and 13 mm wrenches.
- Touring
- Steps 2 to 4 cover the assembly of the back flap closer.
- Optimax / Minimax
- The back flap kit CZ000518 is for V2 versions only.
- Touring
- The back flap kit CZ000753 is for the Touring V2 only.
At a glance
- Optimax / Minimax, step 7
- Drill 11 mm in the centre of the closing hole
- Touring fixing bolts (parts 5 and 8)
- 8 x 30 mm
Tools you need
- Drill
- 6 mm and 11 mm drill bits
- Rivet nut tool
- 4 mm Allen key
- 6 mm Allen key (Touring)
- 10 mm and 13 mm wrenches