Procedure
Replacing the breakaway cable
How to replace the KNOTT breakaway cable that applies the trailer handbrake if the trailer comes off the tow ball while driving.
![]()
All models
Safety first
- The breakaway cable applies the handbrake if the trailer comes off the tow ball while driving: check that it is correctly attached both to the coupling and to the towing vehicle.
- Secure the trailer so that it cannot move before changing the cable.
- Once fitted, the cable must not touch the road.
Steps
0 / 4 done
Secure the trailer
Secure the trailer so that it cannot move.
Remove the worn cable
Take off the worn breakaway cable.
Attach the cable to the handbrake
Fit the cable eyelet (2) on the handbrake lever.
Parts: Breakaway cable
Fit the snap hook
Pass the snap hook (1) through the opening of the cable guide.