Assembly instructions

Corner partition installation – Maxi 2, 3 and 4

How to fit the hinged CORNER partition and its handles in Maxi 2, Maxi 3 and Maxi 4 trailers.

Cheval LibertéMaxi 2 · Maxi 3 · Maxi 4

Before you start

Maxi 2 bought before November 2023
Cut the aluminium panel to 1,570 mm.
Maxi 3 or Maxi 4 bought before November 2023
Cut the aluminium panel to 1,720 mm.
Maxi 2
Use the ZS 8 handle.
Maxi 3 / Maxi 4
Use the ZS 6 handle; drill 4 holes and fit rivet nuts first.

At a glance

Pad size
12 x 35 x 195 mm
Rivet nut holes (Maxi 3 / Maxi 4)
4 holes, 11 mm

Tools you need

  • Drill with 11 mm bit (Maxi 3 / Maxi 4)
  • Rivet nut tool (Maxi 3 / Maxi 4)

Drawings

Steps

0 / 6 done

  1. Drill the holes (Maxi 3 / Maxi 4)

    Drill 4 holes of 11 mm for the rivet nuts at the positions shown on the drawing.

  2. Fit the rivet nuts (Maxi 3 / Maxi 4)

    Rivet the rivet nuts into the 4 holes.

    Parts: Rivet nuts (4)

  3. Slide the pads onto the guide

    Slide the pads onto the guide.

    Parts: Pads

  4. Fit the main handle

    Fit the ZS 8 handle (Maxi 2) or ZS 6 handle (Maxi 3 / Maxi 4) and tighten the screws.

    Parts: ZS 8 / ZS 6 handle

  5. Fit the ZS 5 handle

    Fit the ZS 5 handle and tighten the eye bolt screw.

    Parts: ZS 5 handle, eye bolt screw

  6. Check the installation

    Compare with the "correct installation" pictures.