Assembly instructions
External spare wheel holder for horse trailers
Illustrated guide to fitting the external spare wheel holder on Gold and Touring horse trailers, on aluminium or plywood walls.
Gold 2 · Gold 3 · Gold Aluline · Gold One · Gold S · Touring 2D · Touring Country · Touring Jumping · Touring One
Before you start
- Gold S and Gold Aluline
- The holder can go on the right, left or front wall.
- Gold One, Gold 2, Gold 3, Touring One, Touring Jumping, Touring Country, Touring 2D
- The holder can go on the right or left wall only, not the front wall.
- Gold 3 Composite
- No mounting position is allowed for this holder.
- Aluminium walls
- Drill 5 mm holes and fix the holder with 6 rivets using a riveting tool.
- Plywood walls
- Drill 8 mm holes, protect them with acrylic paint, then fix the holder with bolts and self-locking nuts (13 mm wrench).
At a glance
- Side wall position
- Between the wheels, 250 to 300 mm above the mudguard
- Front wall position
- 650 to 700 mm high
- Drill bit, aluminium walls
- 5 mm
- Drill bit, plywood walls
- 8 mm
Tools you need
- Tape measure
- Pencil
- Drill
- 5 mm drill bit (aluminium walls)
- 8 mm drill bit (plywood walls)
- Riveting tool (aluminium walls)
- Acrylic paint (plywood walls)
- 13 mm wrench