Assembly instructions

Installing the reversing camera interference filter

How to wire the 12 V anti-interference filter between the trailer wiring and the reversing camera, inside the interior lamp.

Debon TrailersBox trailers (Cargo)

Safety first
  • Use only a hand screwdriver to refit the lamp, so as not to damage the mounting holes.

At a glance

Filter voltage
12 V

Tools you need

  • Hand screwdriver

Drawings

Steps

0 / 6 done

  1. Remove the lamp

    Remove the 2 screws and take the interior lamp off the wall.

  2. Disconnect the camera

    Disconnect the black camera wire and then the red camera wire from the trailer wiring.

  3. Connect the filter to the trailer wiring

    Connect the black filter wire to the white trailer wire. Connect the red filter wire to the black trailer wire.

    Parts: CZ001548

  4. Connect the filter to the camera

    Connect the black filter wire to the black camera wire and the red filter wire to the red camera wire. Slide insulating sleeves over the wire joints.

    Parts: CZ001548

  5. Tuck the filter away

    Place the filter and the cables inside the lamp.

  6. Refit the lamp

    Screw the lamp, with the filter inside, back in its original place. Use only a hand screwdriver.