Assembly instructions
Tack room installation – sandwich panel
Picture-based guide to fitting the sandwich-panel tack room kit, with the fixings and tools needed.
Touring Country
Before you start
- Retrofitting the tack room yourself
- You also need a drill with 5 mm and 8 mm bits and a riveter.
- Replacing an existing tack room
- You only need 4 mm and 5 mm Allen keys and 13 mm and 17 mm wrenches.
At a glance
- Step 1 drilling
- 8 mm
- Rivets
- 4.8 x 16 mm (8 pcs) and 4.8 x 35 mm (4 pcs)
- Bolts
- M8 x 25 (2), M6 x 16 (3), M10 x 25 (3)
Tools you need
- Drill
- 5 mm and 8 mm drill bits
- Riveter
- 4 mm and 5 mm Allen keys
- 13 mm and 17 mm wrenches