Procedure

Adjusting the hydraulic power unit

Three steps to reset the adjusting screw of the hydraulic power unit on Debon PW tippers with a 6 mm Allen key and a 17 mm wrench.

Debon TrailersPW tippers

At a glance

Final setting
Allen bolt screwed fully in, then unscrewed 4.25 turns

Tools you need

  • 17 mm wrench
  • 6 mm Allen key

Steps

0 / 3 done

  1. Loosen the locking nut

    Put the 6 mm Allen key in the adjusting screw on the power unit. Unscrew its locking nut as far as possible with the 17 mm wrench.

  2. Screw the bolt fully in

    Tighten the Allen bolt until it reaches the end of the thread.

  3. Set and lock

    Unscrew the Allen bolt 4.25 turns. Hold it there and tighten the locking nut with the 17 mm wrench.

Drawings