Safety notice
Safe disposal of a worn coupling shock absorber
How to safely release the gas and drain the oil from a worn gas-filled coupling shock absorber before scrapping it.
![]()
All models
Safety first
- The coupling shock absorber contains gas under high pressure: take particular care.
- Wear protective glasses for every operation.
- Always release the gas first, then drain the oil.
- Dispose of every worn shock absorber in line with local regulations.
At a glance
- Gas chamber drilling point
- Approx. 60 mm from the shock absorber head
- Oil chamber drilling point
- Approx. 60 mm from the piston rod
Tools you need
- Drill
- Protective glasses
- Container for the oil
Steps
0 / 4 done
Put on protective glasses
Wear protective glasses for all the following operations.
Release the gas
Drill through the gas chamber approx. 60 mm from the shock absorber head to let the gas out.
Drain the oil
Drill a hole in the oil chamber approx. 60 mm from the piston rod and drain the oil into a container.
Scrap the shock absorber
Once emptied of gas and oil, the shock absorber can be scrapped according to local regulations.