Procedure

Replacing the wheel screws

How to replace the wheel screws on a braked drum or an unbraked hub, tighten them to 80 Nm and re-check them after a short drive.

Cheval LibertéDebon TrailersAll models

Safety first
  • Secure the trailer so it cannot roll, and against falling once raised.
  • Check the tightness of the wheel screws again after the first kilometres.

Before you start

Braked or unbraked axle
The procedure is the same for a brake drum and for an unbraked hub.

At a glance

Wheel screw torque
80 Nm
Re-check tightness
After the first kilometres of driving

Tools you need

  • Torque wrench

Steps

0 / 8 done

  1. Secure the trailer

    Secure the trailer so it cannot roll.

  2. Loosen the wheel screws

    Loosen the wheel screws (1) in the drum or hub.

  3. Raise the trailer

    Raise the trailer and secure it against falling.

  4. Remove the screws

    Unscrew and remove the worn screws.

  5. Fit the new screws

    Screw the new wheel screws into the drum or hub.

    Parts: Wheel screws

  6. Lower the trailer

    Lower the trailer onto its wheels.

  7. Tighten to 80 Nm

    Tighten the wheel screws to 80 Nm with a torque wrench.

  8. Re-check after a short drive

    After driving the first kilometres, check that the screws are still tight.

Drawings