Procedure

Replacing the bearing nut in the brake drum

How to remove the wheel and hub cap, replace the brake drum bearing nut and tighten it to 280 Nm.

Cheval LibertéDebon TrailersAll models

Safety first
  • Raise the trailer and secure it so it cannot fall or roll.
  • Unscrew the bearing nut by hand with a spanner. Never use a pneumatic (impact) wrench.

At a glance

Bearing nut torque
280 Nm

Tools you need

  • Hammer
  • Spanner
  • Torque wrench
  • Mechanical grease
  • Pipe with an inner diameter matching the hub cap

Steps

0 / 11 done

  1. Loosen the wheel screws

    Loosen the wheel screws while the wheel is still on the ground.

  2. Raise the trailer

    Raise the trailer and secure it so it cannot fall or roll.

  3. Remove the wheel

    Unscrew the loosened wheel screws and take off the wheel.

  4. Remove the hub cap

    Carefully tap the cap (1) of the bearing nut (2) off the drum (3) with a hammer.

  5. Unscrew the bearing nut

    Unscrew the bearing nut by hand with a spanner. Do not use a pneumatic wrench.

  6. Grease the thread

    Coat the axle stub thread with mechanical grease.

  7. Fit the new bearing nut

    Screw on the new bearing nut by hand with a spanner. Tighten it to 280 Nm with a torque wrench.

    Parts: Bearing nut

  8. Refit the hub cap

    Drive the cap (1) back on with a pipe whose inner diameter matches the cap.

  9. Refit the wheel

    Put the wheel back on and screw in the wheel screws.

  10. Lower the trailer

    Lower the trailer onto its wheels.

  11. Tighten the wheel screws

    Tighten the wheel screws.

Drawings